0 – 0.6 MPa Radial Oil Pressure Gauge – M10 x 1.0 Male
The 0 – 0.6 MPa Radial Oil Pressure Gauge – M10 x 1.0 Male has a clearly marked black on white pressure measurement scale that is easy to read and that is graduated in MPa. The scale has a lower limit of 0 MPa and an upper limit of 0.6 MPa (i.e. approximately 87 psi).
The Gauge is suitable for use in an oil lubrication system whose normal operating pressure is between one-third to two-thirds of the upper limit of the Gauge’s pressure measurement scale (i.e. a normal operating pressure of between 0.2 MPa to 0.4 MPa), and whose maximum operating pressure does not exceed 0.45 MPa.
The measurement accuracy of the Gauge is 2.5%, which is sufficient for the most demanding of oil lubrication system applications.
Its robust steel case houses the Gauge internals, including the dial face and pointer which are protected behind a clear face.
The 40 mm dial diameter and 58 mm overall height of the Gauge make it particularly suitable for use in applications where space is limited.
The radially-mounted inlet port of the Gauge has a M10 x 1.0 male thread that allows it to be connected to a lubrication system part that has a M10 x 1.0 female port. To create an oiltight seal, a medium strength threadlocker should be applied to the thread before it is screwed into the port of the other part.
Please refer to our Shipping and Insurance page for information regarding the time required to dispatch and ship orders, including orders for in stock and backordered products, and available shipping methods.